125KHz RFID EM ID Card Metal Stand-Alone Access Control Keypad

125KHz RFID EM ID Card Metal Stand-Alone Access Control Keypad

Features:

• The Access Control Keypad uses the latest microprocessor technology to operate door strikes and security systems that require a momentary (timed) or latching dry contact closure.
• All programming is done through the keypad. Codes and operating parameters are stored within the microprocessor and can not be lost due to power failure.
• The Access Control Keypad can store 1000 prox cards and user 4 digit password codes. Each 4 digit password code has 10,000 possible combinations. The unit has one relay output with 5 Amp changeover contacts.
• Model: Sebury BC-2000
• Metal shell, anti-explosion; Non-Waterproof
• Support 125KHz EM card (Can’t support HID, Cobra, APCiK etc)
• Low power consumption (Standby input current: <20mA)
• 3 access modes: Card, Card or PIN, Card with PIN
• Relay output load can be 3A max
• Antistatic interference: 12KV
• Operating temperature: 0℃~60℃ (32℉~140℉)
• Note: Non-waterproof. Not support Wiegand 26 output, so can’t connection as an external reader

Specifications:

• Input Voltage:12VDC
• Door relay: 5Am 12VDC
• Tamper protection: Negative loop, normally closed
• Codes: 1 Master, 1000 cards and 1000 codes
• Alarm output load: 150mA pull current
• Keypad: 12 keys, 3 LED status indicators
• Standby Input Current: Less than 20mA
• Card Type: RFID compatible card
• Frequency: 125Khz
• Read range: 50-80mm / 2-3.1in
• Wiring connections: Electric lock / remote request to exit / door open detection / external alarm
  • • • • • • • • • • Memory: Non volatile eeprom memory
                    • Keypad housing: Metal
                    • Dimension: 128x82x28mm / 5.04×3.23×1.1in
                    • Net weight: 500g / 1.1lb

Package: