EM ID 125khz Slim Waterproof IP68 Zinc Alloy Standalone Access Control Keypad

$69.99

  • Waterproof, conforms to IP68
  • Strong Zinc Alloy Electroplated anti-vandal case
  • Full programming from the keypad
  • The unit is single door multifuncion standalone access controller or a wiegand output keypad or card reader
  • It is suitable for mounting either indoor or outdoor in harsh environments.
SKU: UT-N1EM Categories: ,

EM ID 125khz Slim Waterproof IP68 Zinc Alloy Standalone Access Control

Keypad

 

Features:

  • Waterproof, conforms to IP68
  • Strong Zinc Alloy Electroplated anti-vandal case
  • Full programming from the keypad
  • 2000 users, supports Card, PIN, Card+PIN
  • Can be used as a stand alone keypad
  • Backlight keys
  • Wiegand 26 output for connection to a controller, wiegand 26 input for connection to external reader
  • Adjustable Door Output time, Alarm time, Door Open time
  • Very low power consumption (30mA)
  • Fast operating speed, <20ms with 2000 users
  • Lock output current short circuit protection
  • Easy to install and program
  • Built in light dependent resistor(LDR) for anti tamper
  • Built in buzzer
  • Red, Yellow and Green LEDS display the working status
  • The unit is single door multifuncion standalone access controller or a wiegand output keypad or card reader
  • It is suitable for mounting either indoor or outdoor in harsh environments.

Specifications:

  • Operating Voltage: 12VDC
  • User Capacity: 2000
  • Card Reading Distance: 3-6cm / 1.2-2.4in
  • Active current: <60mA
  • Idle current 25±5mA
  • Frequency: 125KHZ
  • Lock output load: Max 3A
  • Alarm output load: Max 20A
  • Operating temperature: -45°C~60°C / -49℉~140℉
  • Operating Humidity: 10%-90%RH
  • Waterproof: conforms to IP68
  • Adjustable door relay time 0-99seconds
  • Adjustable alarm time: 0-3 minutes
  • Wiegand interface: Wiegand 26 bit
  • Product size: 150*43*25mm / 5.9″x1.7″x1″
  • Package weight: 500g / 1.1lb

Installation:

  • Remove the back cover from the keypad using the supplied screw driver
  • Drill 2 holes on the wall for the Self tapping screws and I hole for the cable
  • Put the supplied rubber bungs to into the two holes
  • Fix the back cover firmly on the wall with 2 Self tapping screws
  • Thread the cable through the cable hole
  • Attach the keypad to the back cover

Package:

  • 1 x Metal Access Control
  • 1 x Installation Kit
  • 1 x User Manual

More latest product information of HOBK, please follow our official Twitter Account: @HOBK89016273.

Weight 0.5 kg
Dimensions 15 × 4.3 × 2.5 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

Shopping Cart