13.56Mhz Wiegand 26 Bit IC Card Reader Keypad for Access Control Board

$30.40

  • This card reader needs to work with Wiegand protocol access controller, such as control board, fingerprint device or master controller and it can’t work alone.
  • Support wiegand 26bits or wiegand 34bits output format.
  • Ultra-low power consumption, the standby current is less than 50mA.
  • It uses high performance MCU to ensure stable performance, and low-power circuit makes the service life longer.
  • Card Type: Standard 13.56Mhz IC card (Can’t support HID, Indala, Cobra, APCiK, Paradox, Radio, Honeywell,etc)
SKU: ERFID-1003A/Mifare Categories: ,

13.56Mhz Wiegand 26 Bit IC Card Reader Keypad for Access Control Board

 

Introduction

  • The RFID card reader can’t work-alone and it needs to work with Wiegand protocol access controller, such as access control panel or master controller.
  • It uses ST MCU to ensure stable performance, and low-power circuit makes the service life longer.

Features:

  • The maximum reading distance is 2-23/64“ [6cm].
  • Waterproof, conforms to IP66.
  • It is useful for safety door system, easy to connect and use.
  • Ultra-low power consumption, the standby current is less than 50mA.
  • Support wiegand 26bits or wiegand 34bits output format.
  • Fast response speed, the door opening time is less than 0.3s.
  • This device uses high performance 32-bit MCU to ensure stable performance, and low-power circuit makes the service life longer.
  • Widely used in factories, houses, residential quarters, offices, mechanical and electrical control equipment and so on.

Remark:

  • This card reader will prompt sound and light indication only when the LED and BEEP cables are connected to the access controller.
  • Please connect the Black and Gray wire together for wiegand 34bit output.

Specifications:

  • Working Voltage: 12VDC
  • Static Current: ≤50mA
  • Card Type: IC
  • Frequency: 13.56MHz
  • Working Temperature: -40 to +140°F
  • Working Humidity: 10%-90%RH
  • Waterproof Rating: IP66
  • Enclosure Material: ABS Plastic
  • Panel Material: PC Plastic
  • Enclosure Color: Black
  • Enclosure Size: 86x86x18mm
  • Communication Distance: Less than 328ft
  • Lead Cable Length: 25cm
  • Status Indication: Bi-color LED + Buzzer
  • Output Format: Wiegand 26 bit or Wiegand 34 bit (Selectable)
  • LED Status Indication: Red means standby, Green means activated

Note:

  • Please notice that our wiegand reader can’t be compatible with some encrypted cards, such as HID, Cobra, APCiK, Paradox,etc.
  • Can’t work alone, need work with access control panel.

Package:

  • 1 x Wiegand Reader
  • 1 x English User Manual
  • 4 x Plastic Anchors
  • 4 x #7 x 1″ Self-Tapping Screw
  • Tip: As the RFID reader controlled by access control board, please refer to the manual of access control board for operate it.

More latest product information of HOBK, please follow our official Twitter Account: @HOBK89016273.

Dimensions 8.6 × 8.6 × 2.1 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

Shopping Cart